User's Manual

Troubleshooting
34
5.1 Troubleshooting
SYMPTOM SOLUTION
No picture display and no LED channel display
Check the power connection
No picture display with normal LED channel
display
1. Check the connection with TV
2. Check the connection between TV outside input and
receiver cable
No satellite channel with MAIN MENU screen on
1. Check the LNB, Frequency, Polarization and
Symbol Rate from Installation menu
2. Check the connection of receiver or Antenna Angle
No sound with normal screen display
1. Check between sound output connector and TV
2. Check if it is not in MUTE condition
Remote control unit does not work Check if the batteries in remote control unit are Dead
5.2 Specification
RF input frequency 950 to 2,150MHz
RF input level -65 to -25dBm
LNB control DiSEqC1.0/1.2 ,USALS
LNB power 13V/18V(Max.1000mA)
LNB/Tuner
LNB tone switch 22KH±2KHz(0.6 ~ 0.9Vp-p)
Video MPEG-II Main Profile@Main Level
MPEG
Audio MPEG-II layer I&II
Resolution 720×576
Video output level 1Vp-p into 75
VIDEO
Aspect ratio 4:3, 16:9
Frequency range 20Hz to 20KHz
Sampling frequency 32/44.1/48KHz
Frequency response 20Hz to 20KHz Hi-Fi Quality Digital stereo
Audio
Audio output level 2V rms into 600
Supply voltage (100~240V AC, 50/60Hz)
Power consumption 45W(Standby 20W)
Operating temp. 0 ℃ ~ 50℃
Storage temp. -40 ℃ ~65℃
Dimensions 340(W)×247(D)×67.5(H)mm
General Data
Weight 3Kg
GENERAL FEATURES
* Free To Air Channel Reception Only from Satellite and Terrestrial broadc
asting
* IPPVR (Audio & Video recording to remote PC via LAN)