Full Product Manual

Page 12
6.0 TROUBLESHOOTING/REPAIR
6.3 FAN REPAIR PROCEDURES
!
CAUTION
Repairs should be performed by a qualified technician!
!
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the power supply before performing any service or
maintenance. Failure to do so may result in serious injury or death.
FAN MOTOR REPLACEMENT FOR CS6210 & CS6210HV
1. Remove cooling pads (see section 5.1 for pad removal instructions)
2. Remove the black motor wiring plate and disconnect motor wires.
(Mark each wire with a marker or marker tape to allow for easy
matching when installing new motor.
3. Remove louver
4. Remove the (4) nuts and bolts that mount the motor, fan, and
support braces (complete fan assembly).
5. Replace new fan assembly.
6. Secure with (4) nuts and bolts.
7. Replace any wire ties that were removed when taking out the old
fan assembly.
8. Replace the black motor wiring plate.
9. Reinstall pads and connect power