Installation Guide

ManualsBrandsCoolaroo ManualsWindow ShadesMocha Light Filtering Cordless High-density Polyethylene Exterior Shade (Common: 72-in x 72-in; Actual: 74.75-in x 72-in)

Sun Shade

with Full Valance

10-minute set up

(approximate time)

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(6) Tie Downs

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Wand

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(7) Shade

(8) Idle End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(1) Shade

(8) Idle

End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(3) Bottom

Rail Cap

(5) Bottom Rail

(2) Wand

(1) Full Valance

(6) Receiver

Zone 1

Zone 2

Zone 3

Zone 1

Zone 2

Zone 3

(4) Bungee

(8) Brackets

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(6) Tie Downs

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Wand

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(7) Shade

(8) Idle End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(1) Shade

(8) Idle

End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(3) Bottom

Rail Cap

(5) Bottom Rail

(2) Wand

(1) Full Valance

(6) Receiver

Zone 1

Zone 2

Zone 3

Zone 1

Zone 2

Zone 3

(4) Bungee

(8) Brackets

Exterior

INSTALLATION

INSTRUCTIONS

DETERMINE DESIRED MOUNTING METHOD

This two-in-one valance design allows you to easily mount the

sun shade to either a ceiling (fig. 1) or a wall (fig. 2).

For ease and flexibility in mounting, the three quick-connect

brackets can be positioned anywhere inside each of their three

61 cm (24

in) zones.

Be sure to keep each of the three brackets inside these zones for

proper balance and weight distribution of the valance.

fig. 1 fig. 2

WARNING: If you do not ensure the quick mount brackets are positioned with the release button in the correct direction (fig. 4 and fig. 5), removing

the shade may be difficult. The brackets must be positioned and installed level to ensure the shade hangs level and functions properly.

ADDITIONAL TOOLS NEEDED

Drill with 3/16 in bit

Level

Tape Measure

Pencil

PARTS LIST PARTS QTY

1 Sun Shade with Full Valance 1

Control Wand

Z 13-CH 1

3 Bottom Rail Caps with Rings 11-BRC 2

4 Bungee Tie Downs 11-BUNGEE TD 2

5 Bottom Rail 1

6 Bungee Receiver 1-RECEIVER 2

7 Wood Screws 4-WS 10

8 Brackets Z-14-FCIBW 3

9 Anchors 10

INSTALL QUICK CONNECT BRACKETS AND SUN SHADE

IMPORTANT: The screws included in your hardware kit are for use with wood

only. Call Customer Service (1-800-560-4667) for mounting recommendations when

attaching your shade to any other material.

a. In the desired locations, attach Quick Connect Brackets (fig. 3) with screws, into

wooden stud.

b. Install the Shade by snapping the unit securely into place.

fig. 3

This side goes on

mounting surface

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(6) Tie Downs

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Chain

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(4) Wand

(3) Bracket Covers

(5) Bottom

Rail Cap

(7) Bottom Rail

(8) Shade

(9) Idle End

Unit

(10) Idle End Plug

(11) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(7) Shade

(8) Idle End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(2) Clutch Plug

(1) Clutch Unit

(3) Wand

(4) Bottom

Rail Cap

(6) Bottom Rail

(1) Shade

(8) Idle End

Unit

(9) Idle End Plug

(10) Aluminum Tube

(3) Bottom

Rail Cap

(5) Bottom Rail

(2) Control

Wand

(1) Full Valance

(6) Receiver

(4) Bungee

(7) Screws

(8) Brackets

Summary of content (6 pages)

PAGE 1
Exterior Sun Shade INSTALLATION INSTRUCTIONS (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (2) Clutch Plug (2) Clutch Plug (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (2) Clutch Plug with Full Valance (2) Clutch Plug (8) Idle End (8) Idle End Unit Unit (8) Shade (7) Shade (3) Bracket Covers (3) Bracket Covers (9) Idle End (9) Idle End Unit Unit (8) Shade (4) Chain (6) Botto
PAGE 2
NOTE: If installing to a ceiling (fig. 4) ensure the tab on the bracket is facing towards you. If installing to a wall (fig. 5) ensure that the tab on the bracket is facing downward. Allow at least 5.08 cm (2 in) of clearance between the bracket and wall or ceiling to allow space to snap shade onto bracket. If brackets are installed upside down or backwards, the blind WILL NOT FIT. fig. 4 fig. 5 Ceiling Mount Wall Mount Tabs downward. Tabs forward. fig.
PAGE 3
Store Extérieur INSTRUCTIONS D’INSTALLATION (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (2) Clutch Plug (2) Clutch Plug (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (2) Clutch Plug avec boîte à rideau complète (2) Clutch Plug (8) Idle End (8) Idle End Unit Unit (8) Shade (7) Shade (1) Boîte à rideau complète (3) Wand (4) Bottom (4) Bottom Rail Cap Rail Cap (2) Clutch Plug (3
PAGE 4
REMARQUE : En cas d’installation au plafond (fig. 4), assurez-vous que la languette du support est tournée vers vous. En cas d’installation au mur (fig. 5), veillez à ce que la languette du support soit tournée vers le bas. Prévoyez au moins 2 cm (2 po) de dégagement entre le support et le mur ou le plafond pour laisser assez d’espace pour enclencher le store sur le support. Si les supports sont installés à l’envers ou inversés, le rideau ne RENTRERA PAS. fig. 4 fig.
PAGE 5
Persiana Parasol Exterior INSTRUCCIONES DE INSTALACIÓN (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (10) Idle End Plug (11) Aluminum Tube (1) Clutch Unit (2) Clutch Plug (2) Clutch Plug (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (9) Idle End Plug (10) Aluminum Tube (1) Clutch Unit (2) Clutch Plug con guardamalleta completa (2) Clutch Plug (8) Idle End (8) Idle End Unit Unit (8) Shade (7) Shade (1) Guardamalleta completa (3) Wand (4) Bottom (4) Bottom Rail Cap Rail Cap (3) Wand (
PAGE 6
NOTA: Si va a instalar en cielo raso (fig. 4) asegúrese que la lengüeta del soporte esté mirando hacia usted. Si va a instalar en una pared (fig. 5) asegúrese que la lengüeta del soporte esté hacia abajo. Deje por lo menos 2 pulgadas de espacio libre entre el soporte y la pared o el cielo raso para que encaje la persiana en el soporte. Si los soportes se instalan al revés, la persiana NO ENCAJARÁ. fig. 4 fig. 5 Montaje del techo Montaje de pared Lengüetas hacia abajo Lengüetas hacia adelante fig.