Full Product Manual

12
Note
1. After adding the sensor ID, please confirm whether this ID number is as same as the ID
number printed on sensor. If not, please add again.
2. The method of Add PIR by scan QR code is the same as Contact sensor, please refer to 4.2.
3.The sensitivity of PIR covers area of PIR detection, only within the detection area,
PIR can be triggered, beyond the range of PIR detection, PIR will not be triggered.
4.The gateway can add up to maximum 10 pcs PIR.
b.Input the sensor name Click“ ”
4.5 Add Smoke Sensor
a.Click “Add Sensor” Click --- Click “ ” “ ” Smoke Sensor
Press code button for
matching code