Full Product Manual

14
Note
1. After adding the sensor ID, please confirm whether this ID number is as same as the
ID number printed on sensor. If not, please add again.
2. The method of Add Siren Alarm by scan QR code is the same as Contact sensor,
please refer to 4.2.
3.The siren alarm can be manually controlled to trigger alarm.
4.The NVR Gateway can add up to 2 siren alarms.
b.Input the name of Clicksensor “ ”
4.7 Add sos
a.Click “Add Sensor” Click --- Click “sos” “ ”
SO S
Click the button of
sos to match code