Full Product Manual

15
There are two functions for sensor linkage, one of them is actively link others sensor work,
this device is called as triggered device, including PIR, door contact, smoker sensor and
SOS; the other is passively accept the linkage message which alarm host send, including
power plug, microphone and IP camera.
b.Input the name of Clicksensor “ ”
Note
1. After adding the sensor ID, please confirm whether this ID number is as same as the
ID number printed on sensor. If not, please add again.
2. The method of Add SOS by scan QR code is the same as Contact sensor, please
refer to 4.2.
3.The gateway can add up to 10 pcs SOS.
4.8 The sensor linkage
The linkage setting of triggered device
The linkage setting of contact sensor---Enter the contact sensor interface---Click the
contact sensor