Full Product Manual

Network Camera Installation Manual

Fig 8.2a Fig 8.2b

Fig 8.3 Fig 8.4

8.2 WIFI Settings

In the “Advanced Setting”, Tap “Manage WIFI networks”, select your WIFI router you want

to connect the camera to. Then input password of the WiFi router. After successful setting,

camera will reboot. After reboot, LAN cable can be unplugged.

8.3 Record Setting

In the record settings, you can

select full time recording or alarm

event(motion detection) recording.

8.4 Alarm Setting

In the “Alarm Setting”, turn off guard switch and

open “alarm linkage(PIR)” to turn on motion

detection by PIR sensor only. Alarm SD card

recording and push notification can be turn on or off.