Specifications

ManualsBrandsCooler Master Manualschassis componentsCenturion 534 +Plus, Silver

Centurion 534

English

Warranty Information

Cooler Master guarantees that this device is free of defect in material and

workmanship, and provides a two-year limited hardware warranty for the device

commencing from the date of purchase. Please keep your receipt for proof of

purchase.

This product is designed for computer usage only. Using this device in any other

capacity voids the warranty. If you are not familiar with computer hardware

installation, please ask for professional assistance.

The warranty offered covers normal use. Defect or damage that result from

improper operation, storage, misuse or abuse, accident or neglect, which are not

the fault of Cooler Master, are exclude from warranty coverage.

Note: the warranty is voided by removal or alternation of product or parts identification labels.

Chapter 1: Product Overview

Specifications:

Available Color Silver / Black

Dimensions L480 x W202 x H435 mm

Weight 9.7kg

Material Aluminum & Mesh bezel, SECC chassis

M/B Type ATX , m-ATX

5.25" Drive Bay 5 (Exposed)

3.5" Drive Bay 1 (Exposed); 4 (Hidden)

Cooling System One 120x120x25mm rear fan(exhaust);

One 120x120x25mm front fan (intake) (optional)

I/O Panel USB2.0 x 2; MIC x 1; SPK x 1; IEEE1394 x 1

Power Supply Standard ATX PS2, 380W. support LGA775 (optional)

Diagram:

One 120x120x25mm side fan (intake)

Summary of content (6 pages)

PAGE 1
Centurion 534 English Warranty Information Cooler Master guarantees that this device is free of defect in material and workmanship, and provides a two-year limited hardware warranty for the device commencing from the date of purchase. Please keep your receipt for proof of purchase. This product is designed for computer usage only. Using this device in any other capacity voids the warranty. If you are not familiar with computer hardware installation, please ask for professional assistance.
PAGE 2
Centurion 534 English! Parts list: Item Part Name Q’ty Item Part Name Q’ty 1 Small Shield 1 8 Latch 1 2 Big Shield 5 9 Interface card Shield 7 3 I/O Module 1 10 Right Side Casing 1 4 Power Key 1 11 Left Side Casing 1 5 Reset Key 1 12 Manual Screw 4 6 Casing 1 13 Air Scoop 1 7 IO panel 1 14 120 Fan 2 Fittings Pack Figure Name 6.5mm Outer thick inner thin copper post Q’ty 2 Used for Used especially for positioning the mainboard. 6.
PAGE 3
Centurion 534 English Chapter 2: Installation Removing side panels 1. Loosen the screws manually; slide the side casing backward to remove it. 2. To assemble it, please follow the above step reversely. Installing the Motherboard 1. Remove the side casing. 2. Lie down the casing. 3. Aiming at the holes on the PCB, and secure the alumnus post with screws. 4. Align the holes of PCB and casing. Secure them by fastening screws on the PCB. Install add-on card 1. Press to loosen the latch on the inner casing.
PAGE 4
Centurion 534 English! 3. Lock the latch back from the outside of the casing. Installing Drives (CD-ROM, FDD and HDD) Hands on where is indicated by an arrow and exert some force to remove the front panel. 1. Installing Hardware Device on 5.25"3.5" or "HDD" bracket-- Layer III, IV, or V. 2. Insert the hardware device in place; align the screw holes of the device with those of the HDD rack. 3. Push forward the plastic handling and tightening it. 4. Push the lock and the installation is done.
PAGE 5
Centurion 534 English Replacing/Installing the Case Fan Change the Front Fan (optional) 1. Remove the side casing. 2. Loosen the lower and side screws to remove the HDD bracket. 3. Loosen the fan screws from the front casing, and then remove the fan. 4. Install the new fan and secure it with screws. Continue to put it back on the HDD rack and secure it with screws. Change the Rear Fan 1. Loosen the fan screws from the rear casing and remove the fan. 2. Install the new fan and secure it with screws. 1.
PAGE 6
Centurion 534 English! I/O Function Panel Installation Guide z Please refer to the illustration on the section of USB2.0, IEEE 1394, and Audio connector from the motherboard user manual. Please select the motherboard which used the same USB2.0, IEEE1394a, AC'97,HD Audio standard as below; otherwise, it will cause damages to device(s). z The following illustration is a connection diagram for the front panel I/O cable. z NEVER connect an IEEE1394a cable to the USB2.0 connector.