ORB X A Fully Immersive Multi-Purpose Semi-Enclosed Station for Gamers And Professionals.
TA B L E O F C O N T E N T S Overview OA. OA. OA. OA. OA. 01 02 03 04 05 | | | | | -------------------------02 ---------------------------03 REMOTE CONTROL BUTTONS AND FUNCTIONS -----------06 LEFT SIDE CONTROL DESCRIPTIONS ------------------07 RIGHT SIDE I/O DESCRIPTIONS ----------------------08 PRODUCT SPECIFICATIONS PARTS AND FUNCTIONS Instructions TU. TU. TU. TU. TU. TU. TU. TU. TU.
Product Specifications Product Name ORB X Voltage 100 ~ 240 VAC 50 / 60 Hz Power Support 1200Watt for PC and monitor Power consumption 750Watt max. Cockpit Material ABS Ergonomic Recliner Material Genuine leather Length: 1881mm Dimensions Width: 1810mm Height: 2088mm Weight Weight of entire machine: 343.5KG Operating Temperature Range 5°C ~ 40°C (Space temperature) Operating Humidity Range 5%~95%RH Load Limit Single-monitor: support to 8KG, the max.
Shuttle dome bottom view Leg rest Foot pedal 7 Cooler Master halo 4 6 Monitor mount 3 Desktop Full-range and tweeter speakers 2 5 Shuttle dome 1 PA R T S A N D F U N C T I O N S A 3
Lumbar support adjustment 17 Base 16 Subwoofer 15 Ergonomic recliner 14 Control panel 12 Armrest 13 Cup holder 11 10 Vents 9 Headrest 8 Cockpit ARGB LED light strips PA R T S A N D F U N C T I O N S B 4 16 11
20 21 Rear cover handle Cockpit rear cover Network jack Power jack 18 19 20 21 PA R T S A N D F U N C T I O N S C 5 Armrest / Headphone holder Vents 24 I/O panel 23 22
One button open / close cockpit 31 Recline backrest Move ergonomic recliner backwards 33 Lower leg rest 30 Lean backrest forward 27 Lower shuttle dome Move ergonomic recliner forward 32 Lift leg rest 29 28 26 Lift shuttle dome 25 R E M OT E C O N T RO L BU T TO N S A N D F U N C T I O N S 6
40 Volume up 41 Volume down S/PDIF audio input Bluetooth audio input 37 38 (Cycle through game [purple light], theater [green light] and music [white light] modes, only applicable to S/PDIF audio input) Speaker switch 39 Audio mode 36 One button open / close cockpit Cockpit position memory (Long press for 5 seconds) Switch between open position and 35 memory position (Short press) 34 Power switch(Long press) L E F T S I D E C O N T RO L D E S C R I P T I O N S 7
48 (The fast charging speeds may vary depending on the devices or cables.) 3.5 mm Audio & MIC combo jack 44 45 49 47 USB-A port (5V/1.5A) 43 USB-C port ( 60W PD) 46 USB-A port (5V/0.9A) 42 Immersive light switch USB-C port (5V/1.5A) USB-A port (5V/0.9A) USB-A port (5V/0.
M O N I TO R M O U N T Height adjustment method (It is recommended for the qualified worker to adjust the height according to your needs first during installation) Height adjustment range: 26mm Angle adjustments and rotations Single-monitor mount/support arm setting a a. Monitor can be tilted upwards and downwards. The degree of the tilt will depend on the monitor chosen for installation, such as the size, type, and brand. (Do not hit the monitor while adjusting.) b 9 b. Monitor can rotate.
Triple-monitor mount/triple support arm setting a a. Monitors can be tilted upwards and downwards. The degree of the tilt will depend on the monitors chosen for installation, such as the size, type, and brand. (Do not hit the monitors while adjusting.) b b. The monitors on two sides can be swivelled. The degree of the swivel will depend on the monitors chosen for installation, such as the size, type, and brand. (Do not hit the monitors while adjusting.) c c. Monitors can rotate.
S H U T T L E D O M E L I F T I N G A N D R E M OT E C O N T RO L I N S T RU C T I O N S a b Lift shuttle dome Lower shuttle dome Remote control instructions Illustration of the shuttle dome lowered to the lowest position The height limit of the shuttle dome is 240cm.
R E C L I N I N G BAC K R E S T a Lean backrest forward Recline backrest Remote control instructions Manual adjustment of lumbar support (must be pressed simultaneously) Backrest can recline to 130 degrees maximum Caution! Since the relative positions of the front and back of the ergonomic recliner are different, the system will limit the reclining angle of the backrest to prevent it from hitting the inside of the cockpit.
M OV I N G E RG O N O M I C R E C L I N E R F O R W A R D A N D BAC K W A R D S a Move ergonomic recliner forward Move ergonomic recliner backwards Remote control instructions The ergonomic recliner can be adjusted forward and backwards for 190 mm 13
E RG O N O M I C R E C L I N E R L E G R E S T a Lift leg rest Lower leg rest Remote control instructions The leg rest cannot bear the weight of a person alone 14
COCKPIT CABLE Open the cockpit rear cover, to check if all the cables are in place. HDMI cable x 3 USB2.0 - I/O Hub Cable USB2.0 - Master Plus+Cable RJ45 - Ethernet Cable 15 3.5mm - Microphone Cable 3.5mm - Headphone Cable S/PDIF - 2.
Monitor Mount HDMI Cable A HDMI Cable B HDMI Cable C HDMI Cable A HDMI Cable B HDMI Cable C Caution! The fiber optic cable MUST be used for 2.
A RG B L E D L I G H T C O N T RO L Lighting effect switch Color / speed toggle switch Left armrest ARGB LED light control Shuttle dome ARGB LED light strips Cockpit ARGB LED light strips 17 Switch instructions Modes of lighting effects and speed levels 1. Lighting effect switch (red light) Cycle through 8 types of lighting effects and OFF mode 2. Color / speed toggle switch Toggle speed and color 1. Static support RGB 2. Rainbow spectrum with 3 speed levels 3. Breathing RGB with 3 speed levels 4.
P OW E R O P E R AT I O N S 1 Caution Do not press the cockpit Do not put unrelated objects inside the cockpit Keep the cockpit away from fire and water Ethernet port (factory setting)/external cable harness opening a. This is the Ethernet port when the host is placed in the hidden chassis (factory setting) b.
S A F E T Y P R E C AU T I O N S 1. Do not sit or stand on the backrest, leg rest, side shell, armrests or desktop. 2. The station should be placed on a horizontal plane to prevent falling and causing accidents or injuries. 3. Do not put any objects into any gaps between the table and armrests. 4. Do not get under the table or the recliner to avoid injuries or scratches. 5. Please keep sharp objects away from the mouse pad or seat surface. 6. Please operate the station in a dry environment. 7.
20. PLEASE DO NOT TOUCH WHEN SEAT IS MOVING To warn people not to touch the seat while it is moving. 21. HANDS PINCHING To warn people not to put their hands into the gap to avoid injuries. 22. MAXIMUM WEIGHT TABLE CAN HOLD IS 25 KG To warn people not to place too many or heavy objects on the table. 23. LEANING OR SITTING ON THE SIDE SHELL PROHIBITED To warn people not to lean or sit on the side shell. 24. NO HANGING OR PULLING To warn people not to hang on or pull the shuttle dome. 25.
FAQ Question 1: What is the required area? Answer: It takes up to 4 square meters to place the station. minimum height of 270 cm is also required for the shuttle dome to be lifted and adjusted. Question 2: How to transport and install ORB X? Answer: Please contact your local service provider. Question 3: Can ORB X be disassembled after installation? Answer: Please contact your local service provider.
Question 8: How to replace the immersive light? Answer: MR16 standard specifications, DC12V. The replacement method is as follows: A. Turn the light fixture base counterclockwise and take out the immersive light. B. Replace the immersive light. ( No polarity difference, no need to worry about wrong circuit connection.) C. Align the tenon and insert the immersive light into into the ceiling box. D. Turn the light fixture base clockwise.
T RO U B L E S H O OT I N G 1. If there is no response when turning on the station by pressing the power button on the left armrest control panel, please follow the steps: A. Confirm whether the power plug is inserted properly. B. Confirm whether the power switch is on. C. Confirm whether the outlet is overloaded and causes the fuse to burn. D. If the problem still exists after all actions above are taken, please unplug and plug in again. 2.
3. If the monitor displays nothing, please follow the steps: A. Check if the monitor power cord is connected and if the monitor is powered on. B. Check whether the HDMI cable is connected to the computer and monitor, and check if the cable numbers on both sides are the same. 2. If the desktop cannot rotate or produces abnormal sounds, please follow the steps: A. Check whether the shaft screws have loosened. B. Check whether there is any object obstructing the movement. 3.
R E G U L ATO RY S TAT E M E N T United State FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Taiwan (R.O.C.) 「減少電磁波影響，請妥適使用」 Low power device 取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設 計之特性及功能。 低功率射頻器材之使用不得影響飛航安全及干擾合法通信； 經發現有干擾現象時，應立即停用，並改善至無 干擾時方得繼續使用。 前述合法通信，指依電信管理 法規定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及 醫 療用電波輻射性電機設備之干擾。 Europe(CE) Hereby, [Cooler Master Inc.], declares that this [Orb X] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. URL: www.coolermaster.com Unite Kingdom Hereby, [Cooler Master Inc.
Make it Yourself A fully immersive multi-purpose semi-enclosed workstation for gamers and professionals.
