User's Manual

Question 1: What is the required area?

Answer: It takes up to 4 square meters to place the station.

minimum height of 270 cm is also required for the shuttle dome to be lifted and adjusted.

Question 2: How to transport and install ORB X?

Answer: Please contact your local service provider.

Question 3: Can ORB X be disassembled after installation?

Answer: Please contact your local service provider.

Question 4: Can ORB X be moved after installation?

Answer: Yes, ORB X comes with Mecanum wheels which allow it to be moved for a

short distance.

Question 5: How to clean the ORB X exterior?

Answer: It can be wiped with a damp cloth when dusty.

Question 6: How to clean the seat surface?

Answer: It can be cleaned with a leather cleaner on a regular basis or when needed.

Question 7: Why is there a gap between the mouse pad and the desktop?

Answer: The ORB X mouse pad is made of natural material and there might be shrinkage

due to thermal expansion and contraction, which does not affect the product quality.

ORB X operation suggestion:

1. When the cockpit is turned on, press the "one-button switch" for the rst time, the shuttle

dome and seat return to their original positions, and press the "one-button switch" for the

second time, the cockpit position will be memorized.

2. Press the "one-button switch" to return the shuttle dome and seat to their original positions

when leaving the cockpit.

ORB X safety operation:

1. Press the "one-button switch", and the cockpit position will be memorized, press the "one-

button switch" to interrupt, and then press the "one-button switch" to complete the action

2. Press the "one-button switch", and the shuttle dome and seat return to the original position,

press any button to interrupt, and then press the "one-button switch" to complete the action

3. If the power is not turned o󰀨 in the original position, the seat back will not be able to move

back. It is recommended to press the "one-button switch" to return to the original position.

FAQ