User's Manual

TROUBLESHOOTING

If there is no response when turning on the station by pressing

the power button on the left armrest control panel, please follow

the steps:

A. Conrm whether the power

plug is inserted properly.

B. Conrm whether the

power switch is on.

C. Conrm whether the

outlet is overloaded and

causes the fuse to burn.

D. If the problem still exists after all actions above are taken,

please unplug and plug in again.

2. If the speakers cannot produce sound, please follow the steps:

A. Conrm whether the speaker switch is on. The indicator lights will be on when

the speaker switch is on.

B. Conrm whether the desired audio input is active. When S/PDIF audio input or

Bluetooth audio input is active the corresponding indicator light will be on.

C. Confirm whether the S/PDIF cable connects to the computer properly and

choose the correct output on sound settings when switching to S/PDIF audio input.

D. Confirm whether your device connects to ORB X when selecting Bluetooth

audio input. If you want to pair your device with ORB X please press “Bluetooth

audio input” button on the left control panel. The speaker plays a notication sound

when entering pairing mode and plays a confirmation notification sound when

pairing completed.

E. Adjust the volume on your computer or device.

F. Press “Volume up” button or “Volume down” button to adjust the speaker volume.