Unit installation

17
STORAGE INSTRUCTIONS
If the unit is to be put into storage prior to installation, observe the following precautions:
• Store in a dry and clean place preferably sheltered or shaded area.
• Place the units on a flat solid surface so that the chiller base does not bend or sag.
• Protect equipment from physical damages, store in a location where there is minimal activity, in order to limit the
risk of accidental physical damage.
• Condenser coils should be securely covered to protect the fins from damage and corrosion, particularly where the
building work is in progress.
• Check that all openings, such as water connections, are securely capped.
• It is recommended that the items/accessories supplied loose and the control panel keys are deposited with a
responsible person.
• It is recommended that the units are periodically inspected as a proactive measure.