Unit installation

30
RECOMMENDATIONS FOR SPRING TYPE VIBRATION ISOLATOR SELECTION
The following types of spring isolators are recommended for various applications. Any of these spring isolators can be
supplied by ZAMIL as optional items.
Standard Applications:
The SLR series vertically restrained spring isolation mounts
are recommended as a noise and vibration isolator for
chillers to reduce the transmission of noise and vibration into
supporting structures.
Operating static deflections are available up to 5” to
compensate for long span flexible floor structures and
maintain a high degree of noise and vibration isolation.
Seismic Applications:
The SLRS series vertically restrained seismic spring isolation
mounts are recommended as a noise and vibration isolator
for chillers to reduce the transmission of noise and vibration
into supporting structures in seismic zone applications where
static G ratings in three planes are required.
Operating static deflections are available up to 5” to
compensate for long span flexible floor structures and
maintain a high degree of noise and vibration isolation.
Critical and Noise Sensitive applications:
The SLR-MT vertically restrained air spring isolation mounts
are recommended as a noise and vibration isolator for
chillers to reduce the transmission of noise and vibration into
supporting structures where the equipment are located in
critical areas where noise transmission is a major worry or
very high isolation efficiency is required.