Unit installation

ATTENTION is used to remind or highlight useful information.

WARRANTY

ZAMIL warrants all operating parts in this equipment against factory defects for a period formally agreed upon in the

relevant sales contract. All warranty claims must be supported by proper documentary evidence like copies of

invoices, start-up check out reports, maintenance records etc. to justify the validity of warranty.

In order to avail the warranty, the following requirements must be satisfied:

 The initial Start-up and Commissioning of the units must be carried out by suitably trained and qualified personnel

only preferably by Zamil in accordance with the instructions given in this manual.

 Upon completion of Start-up and Commissioning, duly filled up and certified check out forms for each unit

(sample check out form given in this manual) should be submitted to Zamil Head Office, Dammam.

This warranty is conditional and nullifies if any of the following violations are committed:

 Units are not properly stored, protected or inspected by the client during the period from date of shipment till date

of initial start-up.

 Incorrect installation, start-up & commissioning and operation resulting from a failure to follow and implement the

procedures, instructions and recommendations given in this manual.

 Equipment is operated without or improperly installed field devices such as water flow switch and chilled water

pump interlocking with chillers.

 Any modification to the units which includes changing, adding or removing certain components, altering the

electrical wiring or whatsoever without prior written approval from ZAMIL.

 Insufficient maintenance or non-compliance to the maintenance requirements specified in this manual. Also,

maintenance, service or repair carried out by unqualified personnel.

 Any misuse of this equipment such as, utilizing it for purposes other than those its designed for and operating

outside the design parameters specified in our application catalogue.

 Equipment is operated with refrigerant, oil, water or antifreeze agents which are not approved by ZAMIL.

 Equipment has been damaged due to malfunctioning of interface controllers such as DDC, periphery components

etc.

 Equipment has been damaged by freezing due to improper protection during cold weather or damaged by

accident, fire or any other conditions not ordinarily encountered (force majeure).

ATTENTION

(