Unit installation

APPENDIX
Page 1 of 4
1.
2.
3.
4.
5.
6.
7.
● Product comments
● Installation comments
● Operational comments
Job Name & Address________________________________________________________________________________
_
Customer_________________________________________________________________________________________
_
A
ddress__________________________________________________________________________________________
__
Unit Model #__________________________________
_
Serial #______________________________________________
_
Factory order #________________________________
_
Engineering File #______________________________________
_
1.______
_
2.______
_
3.______
_
4.______
_
5.______
_
6.______
_
7.______
_
8.______
_
1.______
_
2.______
_
3.______
_
4.______
_
5.______
_
6.______
_
7.______
_
8.______
_
Coil Material_________________________
_
Coating type (if any)__________________
_
_________________________________
_
Total Qty.___________________________
_
1._________________________________
_
2._________________________________
_
1._________________________________
_
2._________________________________
_
1.______
_
2.______
_
3.______
_
4.______
_
5.______
_
6.______
_
7.______
_
8.______
_
1.______
_
2.______
_
3.______
_
4.______
_
5.______
_
6.______
_
7.______
_
8.______
_
If equipment is not operational, complete till middle of page 3. If equipment is operational, complete all applicable
portions of this report.
Use one Check out report for each unit.
The format of this report is such, that it can be used for a wide range of equipment. Therefore, when filling out this report,
complete only the applicable parts. If you have any questions when filling out this form or if you encounter any problems
starting the equipment, contact the nearest Zamil office or its representatives for assistance.
IMPORTANT: This check out report must be completely filled out and signed (on page 4).In order for the warranty to be
valid, send copy of the report to Chiller Eng'g. Manager, Zamil Airconditioners, P.O. Box 14440, Dammam 31424, Saudi
Arabia.
TXV/ EXV manufacturer
TXV/ EXV model
Codenser details
Condenser fan motor model
Evaporator/ Cooler model
Evaporator/ Cooler serial #
Compressor model
Serial numbers
CHECK OUT REPORT
INSTRUCTIONS:
NAME PLATE DATA
If there is not enough space available for special equipment, readings, etc; list these on a separate sheet.
Do not rely on field installed gauges, thermometers or other meters for your readings. Use only calibrated gauge
manifolds and meters for your readings. When checking temperatures, check that the thermometers or thermocouples
are insulated to ensure accurate readings.
Final readings should be taken when unit is running at maximum capacity.
Explain operating conditions at time of test, i.e.; compressors fully loaded, hot gas bypass operating, compressor
unloaded etc.
If possible, furnish photographs of installation or problem (i.e.control panel, leaking etc.). Make appropriate comments
on additional sheets as necessary as follows:
66