Unit installation

8
Compressor Circuit Breakers: Protects against compressor branch circuit fault. When tripped (manually or
automatically), the breaker opens the power supply to the compressor and control circuit through auxiliary contacts.
Liquid Coolers: ASME code stamped liquid cooler.
Pressure Gauges: Suction & discharge pressure gauges.
Non-Fused Main Disconnect Switches: De-energize power supply during servicing/repair works as well as with door
interlock.
Condenser Coil Guard: Protect the condenser coil from physical damage.
Compressor/Cooler Guard: Protect the compressor from vandalism.
Compressor Enclosure Box: Reduce compressor operating noise and keep the compressor clean.
Cooler Heater Wrapped: Prevent freezing up of water on low ambient temperature.
Copper Fins & Tubes Condenser Coils: For seashore salty corrosive environments.
Anti-corrosive Coated Condenser Coils (copper or aluminum fins & copper tubes): For seashore or acid
corrosive environments.
BMS Gateway Interface: Interlocking with Building Management Systems.
(BACnet, MODBUS, GSM and Remote Monitoring).
Ground Fault Protection: Provides additional safety protection in the case of abnormal current leakage.
All control & safety devices, accessories and optional items are factory
installed except for unit mounting spring isolators and water flow switch, which
must be installed on job-site.
ATTENTION
(