Specifications

Table 8 - Toolbar Buttons on the Basic Configuration Wizard
Button Tooltip Description
Read a configuration from
a file
Reads a saved configuration
into the Basic Configuration Wizard
so you can apply the configuration to the CoolMax CD-320.
Write configuration from
system to a file
Save a Configuration File
to a file on the host computer.
Restore configuration to
last commit
Cancels proposed changes.
Table 9 - Command Buttons on the Basic Configuration Wizard
Button
Label
Description
To
Advanced
Mode
Opens the Advanced Configuration Wizard
. This option is only available if the Advanced
Configuration mode is enabled for you system. If you are using a SATA host connection,
this option is only available if your SATA controller is PM-aware. For more information,
refer to Customizing the SteelVine Manager on page 82.
Apply
Submits configuration changes to the CoolMax CD-320, closes the Wizard, and displays
the updated configuration on the Status Window
.
Cancel Aborts the changes and closes the Wizard.
Configure Volumes
Note: Before reconfiguring the CoolMax CD-320, you must delete any previously defined
partitions. See Partition a Volume
for details.
1. Select Configure Box from the Edit menu or click the Configure Box toolbar button
to open the Basic Configuration Wizard.