Specifications

Table 11 - Sections of the Advanced Configuration Wizard
Section Description
Storage
Policy
Shows the available SteelVine Storage Policies that you can assign to volumes. The
options are enabled after you create a new volume or select an existing volume to edit.
Drive Graph
Displays disk space for each hard drive. All space allocated to the same volume appears
in a matching color. A hatch pattern indicates a proposed configuration and a solid block
indicates an existing volume.
Volume List
Shows Volume, Mode (storage policy), and Size details for currently configured volumes.
Select a volume to edit or delete. The ‘Total GB’s Left’ field below the volume list
shows the remaining capacity in gigabytes for all the hard drives.
Advanced
Controls
Permit volume creation and modification on each hard drive:
Use check box indicates drive membership within a volume.
Slider specifies capacity allocated to a volume.
Text field shows the capacity specified by manipulating the slider.
Cap field shows maximum capacity for the hard drive.
Vol# shows the hard drive capacity allocated to the noted volume.
Table 12 - Toolbar Buttons on the Advanced Configuration Wizard
Button Tooltip Description
Read a configuration
from a file
Reads a saved configuration
into the Advanced Configuration Wizard
so you can apply the configuration to the CoolMax CD-320.
Available in Basic and Advanced modes.
Write configuration
for system to a file
Save a Configuration File
to a file on the host computer. Available in
Basic and Advanced modes.
Restore configuration
to last Commit
Cancels proposed changes. Available in Basic and Advanced modes.
Create a new volume
Creates a new volume on which to set the SteelVine Storage Policies
and capacity. You can create 2 volumes on each hard drive.
Edit selected volume
Permits the storage policy and capacity of an existing volume to be
modified.
Delete selected
volume
Deletes the volume that is currently selected in the volume list.
Delete all volumes Deletes all configured volumes.
Table 13 - Command Buttons on the Advanced Configuration Wizard
Button Description
To Basic
Mode
Opens the Basic Configuration Wizard
.
When configuring a volume (create a new volume or edit a selected volume)