User manual

18
show below, click on “OK” to scan disk. It is particular useful to check if there is any
error on the hard drive. The next dialogue box will show below. The scanning process
will take some time to complete. It depends on the capacity of the hard disk.
Once the hard drive is ready, the PUBLIC fold will be created by default.
File System Language: The system language will define file name in different
languages that you can use it on NAS. Currently it supports 14 languages for localized
operation systems. Click on the drop down menu to select the desired language.
Hard Disk Sleep Time
The disk will idle if hard disk is inactive after “xx” minutes. To setup the hard disk
sleeping time, input the value in the field. The value should be “5” to “60”. The value
“0” can disable this function. The hard drive will standby all the time without idling.
Status Log
Click “Refresh” to refresh the updated system log information. During the scan disk
process, the status log will show the current scanning status and contains.