Service manual

58
13
Control Circuit Configuration
Indoor Units
(4) Switch positions at shipment from the factory
SW No. Function Description Position at
shipment from factory
SW01 Indoor unit No. Group operation control setup
setup1: Master unit
2 to 16 Slave units
SW02 Network
address setup
For contents of address setup, see the
next page.
SW03 TA adjust
SW06 Ceiling height
When height of ceiling exceeds 2.7m set
No. 1 to ON.
SW07 Central control
switching
SW08 Indoor HP Factory set
setup For contents of switch setup, see section (5)
ON
Address setup by remote
controller is unavailable.
No.7
Address setup by remote
OFF
controller is available.
ON
Communication error
(Non relay)
No.1
(Normal)
OFF
Communication OK
No. 2 OFF Normal
No. 1 ON Normal
No. 2 OFF Normal
No. 1 OFF Normal
No. 2 OFF Normal