Camcorder User Manual

79
Shooting Smiling Faces (Smart Portrait Mode)
More on Shooting
6 q Touch shooting
Can be changed between touch shutter (A 47) and touch AF/AE (A 52). This
setting is not available when Smile timer is set to On.
7 e Skin softening
Enable skin softening. When the shutter is released, the camera detects one or more
human faces (up to three), and processes the image to soften facial skin tones
before saving the image.
The degree of skin softening applied can be selected from High, Normal (default
setting), and Low. When Off is selected, the skin softening function is disabled.
• The effects of skin softening are not visible when framing pictures for shooting.
Check the degree of skin softening performed in playback mode.
8 y Blink proof
When On is selected, the camera automatically releases the shutter twice each time
a picture is taken. Of the two shots, one in which the subject’s eyes are open is
saved.
• If the camera saved an image in which the
subject’s eyes may have been closed, the dialog
shown on the right is displayed for a few seconds.
• When On is selected, the flash is disabled.
• The default setting is Off.
9 a Smile timer
• On (default setting): The camera uses the face detection function to detect a
human face, and then automatically releases the shutter whenever a smile is
detected.
• Off: The camera does not release the shutter automatically with smile detection.
Press the shutter-release button to take a picture.
10 Y Wind noise reduction
Set whether or not to reduce wind noise during movie recording (A 132).
11 n Movie AF mode
Select how the camera focuses during movie recording (A 128, 131).
12 D Movie options
Select the desired movie option when recording movies (A 128, 130).
A blink was detected in the
picture just taken.
C Settings in Smart Portrait Mode
T
here are functions with which this setting cannot be enabled. See “Camera Settings That Cannot Be
Applied Simultaneously” (A 80) for more information.