Digital Camera User Manual
Table Of Contents
- For Your Safety
- Notices
- Introduction
- First Steps
- Basic Photography and Playback: Auto Mode
- More on Shooting
- More on Playback
- Editing Pictures
- Movie Recording and Playback
- Connecting to Televisions, Computers and Printers
- Basic Camera Setup
- Caring for the Camera
- Technical Notes and Index
33
Using the Flash
Basic Photography and Playback: A (Auto) Mode
Setting the Flash Mode
1
Slide the K (flash pop-up) control.
• Flash is raised.
• When the flash is lowered, the flash mode is fixed at
W (Off ).
2
Press the rotary multi selector m (flash mode).
• The flash mode menu is displayed.
3
Use the rotary multi selector to choose the
desired mode and press the k button.
• The mode selected for the flash is displayed.
• When U (auto) is applied, D is only displayed for a
few seconds, regardless of Photo info settings
(A147).
• If the k button is not pressed within a few seconds, the
selection will be canceled.
B Lowering the Flash
When not using the flash, lower it by gently pushing it down.
Flash mode
1/25
1/250
1/250
26
26
26
F5.6
F5.6
F5.6