Digital Camera User Manual

Connect the camera to a television using the supplied audio/video cable to play

back pictures on a television.

1 Turn off the camera.

_I Connect the camera to the TV using the supplied audio/video cable.

Connect the yellow plug to the video in jack and the white pWug to the audioqn jack on

the TV.

....,,

3 Tune the television to the video channel.

See the documentation provided with your television for details.

4 Hold down the[] button to turn on the

camera.

The camera enters pWaybackmode and pictures are

displayed on the tdevision.

While connected to the TV, the camera monitor will

remain off.

_1_ Connecting the Audio/Video Cable

When connecting the audio/video cable, be sure that the camera connector is properly oriented. Do

not use force when connecting the audio/video cable to the camera. When disconnecting the

audio/video cable, do not pull the connector at an angle.

_1_ Video Mode

Be sure that the camera's video mode setting con_rms to the standard used by your television. The

video mode setting is specified from the Videe mode (_ 139) option in the Set up menu

(_ 12S).

111