Digital Camera User Manual

134

_l_ Electronic VR

MENtJbutton ") V (_ -_ _4_ Electronic VR

(Setup

menu) 126)

Choose whether or not electronic VR(vibration reduction) isused when taking still

pictures.

_,II_ AUtO

Electronic VR is enabled and the effects of camera shake are reduced with shooting

of still pictures when aH of the following conditions are met.

• The flash is turned off or set to sWow sync mode.

• A slow shutter speed is used.

• The Continuous setting is set to Single

• The subject is dark.

Off (default setting)

EWectronic VR is disabled.

When Auto isselected, _ isdisplayed in the monitor (l_ 6), and electronic VR is

applied according to shooting conditions.

_1_ Notes on Electronic Vibration Reduction

• Electronic VR does not function when the flash is used, except when slow sync mode is applied,

Electronic VR does not function when slow sync with red eye reduction (_ 54, 55) is used.

• Electronic VR does not function with exposures that exceed a certain length of time.

Electronic VR is activated only when ISO sensitivity (_ 42) is set to Auto.

Electronic VR does not function when Blink proof (_ 64) is set to On in smart portrait mode,

• Electronic VR does not function in the following scene mode:

Sports (_ 54)

Night portrait 1_ 54)

Dusk/dawn 1_ 55)

Night landscape 1_ 56)

Museum (_ 57)

Fireworks show (_ 58)

Backlight (_ 58)

• The effectiveness of electronic VR decreases as camera shake increases,

• The picture taken using electronic VR may be somewhat "grainy" in appearance,

[] Electronic VR for Movies

To tom pensate for camera shake with movie recording, enable Electronic VR (_ 10% from the

movie menu (_ 108).