Digital Camera User Manual

The following table liststhe error messages and other warnings displayed in the
monitor, as well as the solutions for dealing with them.
='_ Problem Solution _'!_
(blinks) Clock not set.
Battery running low.
0
Battery exhausted. Battery exhausted.
O
Battery tern peratu re
high
_r_o (0 blinks red)
O
Please wait for the
m
_u. camera to finish
P_ recording.
rD
Memory card iswrite
protected.
o_
x_ This card cannot be
used.
O
This card cannot be
read.
Battery temperature is
high.
Camera cannotfocus.
Camera cannot perform
other operations until
recording iscomplete.
Write protect switch is
in "lock" position.
Error accessing memory
card.
Set date and time. 129
Prepare to charge or replace
battery. 12, 14
Charge or replace battery. 12, 14
Turn off camera, and allow
battery to cool down before
resuming use. After
five seconds, this message will
disappear, the monitor will
turn off, and the power on
lamp and flash lamp will blink
rapidly. After the lamps blink
for three minutes, the camera
will turn offautomaticaHy.
Pressing the power switch
also turns offthe camera.
Refocus.
Use focus lock.
Wait until message clears
from display automatically
when recording is complete.
17
Slide write protect switch to 21
"write" position.
Use approved card.
Check that connectors are
clean.
Confirm that memory card
is correctly inserted.
26,27
45
150
20
2O
152