Metal Garden Shed OWNER'S MANUAL Instructions for Assembly SD-YX56-H154C Requires two people and takes 1-1.5 hours for lnstallation.
BEFORE YOU START Owner's Manual Prior to installation, it is important that you contact your local government authority to determine if building approval is required. Study and understand this owner's manual. Important information and helpful tips will make your construction easier and more enjoyable. Assembly instructions Instructions are supplied in this manual and contain all appropriate information for your building model. Review all instructions before you begin.
PLAN AHEAD Site Selection l Avoid overhanging trees as much as possible as leaves will make regular cleaning necessary and broken branches are a potential hazard. l Small trees,bushes or fences nearby can be helpful,acting as a wind break. Site Preparation The site must be prepared so that the base of the shed is level all round and checking with a spirit level is required. The base can be constructed by treated timber or concrete,in order to stop the moisture getting into the shed.
NO. Qty. PART 1 1L NO. 1140mm 1 10L 1180mm 2L 1 10R 1 11 1 12 1 15 1 17L 1 17R 1 6 18 432mm 1 19 876mm 7 2 986mm 808mm 6 2 986mm 1560mm 5 2 1304mm 1560mm 4R 2 356mm 600mm 4L 1 1140mm 600mm 3R 1 904mm 955mm 3L 1 904mm 955mm 2R 1 9 1180mm 1R Qty.
NO. PART P1 Qty. NO. PART Qty.
GC 17R 15 GE P10 P7 GC 17L 19 P11 P11 17L P7 GE P10 GC 17R 15 21R GC 21L B4 B3 12 16 B3 21L B4 12 21R 10L 9 P3 P3 P4 10R P3 P3 P4 P3 2L 1L 3L 2R 5 7 18 3R P1 1R 8 11 D1 D2 18 P4 P3 P1 6 4L 4R P4
NO. PART Qty. 2L 1 2R 1 2L F1 2R NO. PART Qty. 1L 1 1R 1 F1 2L 2R 1L F1 1R NO. PART Qty.
NO. PART 5 Qty. 1 F1 F1 5 1、When diagonal measurements are equal,the frame is square. 2、The Floor Frame must be BOTH square AND level or the holes will not line up properly. NO. PART Qty.
NO. PART Qty. Ⅰ 1 P4 P4 Ⅰ S3 5 S3 F1 F2 NO. Ⅱ Ⅱ PART Qty. P3 1 P3 S3 5 F1 NO. PART Qty.
NO. Qty. PART 1 P3 P3 S3 F1 S3 5 F2 NO. Qty. PART 1 P3 P3 5 S3 F1 NO. Qty.
NO. PART Qty. 1 P4 P4 S3 F1 NO. PART Qty. 1 P3 P3 S3 S3 F1 F2 NO. PART Qty.
NO. PART Qty. 9 1 11 1 9 11 5 Qty. NO. 21L 2 B3 2 21R 2 B4 2 12 2 NO. PART Qty. PART B3 12 21L 21L 21R B4 NO. PART B3 x2 12 Qty.
NO. Qty. PART 7 1 8 1 G2 4 7 8 7&8 G2 7 8 G2 NO. Qty. PART P3 2 P3 P3 P3 P3 NO. Qty.
NO. PART Qty. 4L 1 4R 1 6 1 6 6 4R S3 F1 S3 F2 F2 S3 4R 4L NO. PART Qty. P11 1 P10 1 F1 S3 P11 P10 NO. P7 PART Qty.
NO. PART Qty. P11 1 P10 1 P10 F1 S3 P11 NO. PART 19 NO. Qty. 19 1 PART Qty.
NO. Qty. PART 15 2 GC 4 15 GC F1 S3 28 15 NO. PART Qty. D1 1 D2 1 GB 2 GB F2 D1&D2 x2 NO. PART 18 6 F1 18 Qty.
NO. GD PART Qty.
