ITEM#DX-003 Outdoor Picnic Table Instrucyion Manual (6-Person)
Parts List Carefully remove the parts from the carton, verify that you have received all components, and place them individually on a soft cloth to prevent scratches or other damage.
Step 1:Install the table top and legs 1 2 1PC 3PC C E G F J H 6PC 6PC 6PC 12PC 1PC 1PC J As shown in the picture, fix the② table leg with the screw through the slot.
Step 2:Install the tripod 3 N L M I 3PC 6PC 6PC 6PC 1PC Attach 3 pcs of 3 planks with screws as shown in the picture. M L I Note: Do not screw it in place at this stage.
Step 3：Fix the table legs and tripod with screws as shown in the picture. B D E F G H J 3PC 3PC 3PC 3PC 6PC 1PC 1PC J Note: As shown in the picture, the tripod must be placed in the same direction to ensure a smooth assembly. The tripod must be oriented towards the same side as shown in the picture to ensure smooth assembly.
Step 4： Secure the triangular wood block to the tripod with screws as shown.
Step 5： Fix the stool with screws. 4 5 6 3PC 6PC 3PC K L M I 18PC 18PC 18PC 1PC 5 6 5 M L K 4 M Note: Do not tighten the side plate 5 and side plate 6 screws completely. Wait until step 7 is completed before tightening. Prevent the board 6 holes from not fiting properly.
Step 6： Attach the stool to the tripod.
Step 7： Fix table legs and stools with screws. K L M I 3PC 3PC 3PC 1PC 6 Note: There is no need to adjust the direction of the wooden board 6 , and it can be installed normally on both sides.
We sincerely thank you for trusting our service and our products, and may this product add enrichment to your home. We guarantee that the product has undergone strict quality inspection and meticulous packaging. .This manual contains important information and keep it properly. . Please avoid harsh, corrosive and abrasive cleaners. .Keep dry and avoid damp environments.
