Specifications

WWW.COOLTEK.DE Page 02
Antiphon
1. INSTALLATION OF THE MOTHERBOARD
You can install ATX, Micro-ATX or Mini-ITX motherboards into your Cooltek Anphon. The
mounng holes for ATX-Motherboards are labeled with A1 – A9. If you want to mount a
micro-ATX motherboard then please make use of the U1 – U9 labeled screw holes. For
Mini-ITX you use the B1 - B4 marked screw holes. Mount the motherboard standos
according to the form factor and install the motherboard.
You may use the included EPS-extension to lead the cable through the opening in the
upper le of the motherboard tray and connect the cable to the power supply
2. INSTALLATION OF OPTICAL DEVICES
To install opcal drives, please remove both side panels. Aer removing the 5.25 inch
bezel, slide the drive into the desired posion. Then you can secure the drive with the
mounng screws.
AI
13
27
H S L
Low Noise
USB 3.0 3 x Low Noise Fan
Cable Management
CPU Mounng Hole
Boom Mounted PSU Fan Control
Aluminium Front Panel