Product Manual

REAR FILTER
We recommend inspecting at least the return air filter once every two weeks. Once
there is a noticeable amount of dust, clean all three filters by rinsing them under. running
water. In dusty locations, consider arranging for an air conditioning technician to
clean the inside before the summer season.
TOP FILTER
RETURN AIR FILTER
SPECIFICATIONS
SPECIFICATIONS
COOL FOCUS
EASY FOCUS
Electrical supply
200 – 240 V 50Hz 1.3 Amp
200 – 240 V 50Hz 1.4 Amp
Minimum operating voltage
185 V
185 V
Electrical power while cooling
300 W, DC inverter technolog y
320 W
Compressor type
Reciprocating
Reciprocating
Cooling capacity
800 – 1200 W (0.22 – 0.34 tonne)
800 – 1100 W (0.22 – 0.31 tonne)
Cooled air ow
80 – 125 m
3
/hr, variable
115 m
3
/hr
Condensed water
Re-evaporated, can be collected
Re-evaporated, can be collected
Air temperature reduction
8 – 10 °C at 33 °C, 80% RH
9 °C at 33 °C, 80% RH
Refrigerant
R134a, 333g
2021 models & later - R290, 80 g
R134a, 333g
2021 models & later - R290, 80 g
Power cord storage drawer
130 x 150 x 130 mm
130 x 150 x 130 mm
Operating environment
20 – 40 °C, 0 – 90% RH
20 – 40 °C, 0 – 90% RH
Width
273 mm
273 mm
Depth
385 mm
385 mm
Height (covers closed)
550 mm
550 mm
Weight (unpacked)
17 kg
17 kg
Noise
46 – 54 dB
51 dB
Wheels
4 caster wheels
4 caster wheels
Remote control
Infrared with fan, temperature controls
No remote, simple on-o control
Piping, plumbing
Not required
Not required
Consumables
Not required
Not required
Filter cleaning
(front, top, rear)
Check every two weeks
Check every two weeks
SUPPORT
General and toubleshooting FAQ’s can be found on our support pages on
our website at www.closecomfort.com and are updated frequently. For
any general, support, warranty or technical enquiries please contact us at
[e-mail] or visit us at www.closecomfort.com to find
your local retailer and service agent information, and your local customer
support phone numbers.
CLOSE COMFORT AUSTRALIA PTY LTD
SUITE 6 /18 STIRLING HIGHWAY
NEDLANDS WA 6009
T: [phone]
www.closecomfort.com
▷ Adjust the angle of the cold air deflector to ensure that cool air flows past face and neck
▷ Turn off fans when using Close Comfort as drafts from nearby windows and fans may
disrupt the focus enhancer’s air jet.
▷ Pull the focus enhancer nozzle upright for use with the bed tent. If the focus enhancer
nozzle is in the down position, the cool air at the bottom of the tent will mix with the warm
air at the top.
▷ In humid weather, it is normal for moisture to condense on parts of the focus enhancer.
TIPS
PUSH THE NOZZLE DOWN TO FEEL COOLER:
For higher air speed and increased distance of
cooling, push the the nozzle as shown above.
The cold air deflector can be closed with the
focus enhancer nozzle attached in this position.
Pull the nozzle upright to reduce the air flow
speed when using the Igloo bed tent, or when
gentle air flow is preferred. Ensure the nozzle is
lowered back down before attempting to close
the cold air deflector.
FILTER MAINTENANCE
9 10