User manual

www.cooperbussmann.com/wirelessresources
Cooper Bussmann 945U-E Wireless Ethernet Modem & Device Server User Manual
103Rev Version 2.14
JPerf Application
Jperf is a graphical interface that runs over the top of Iperf. It will display a graph result from the Iperf test.
To run Jperf:
1. Open a command prompt and change to the jperf-2.0.2: directory and run the “Jperf” application as shown in
Figure 98. The Command Prompt screen will disappear and the Jperf Screen will appear as shown in Figure
99.
Figure 98 Jperf
Figure 99 Jperf Screen
2. When the Jperf screen appears, select the Client option for Iperf Mode, and enter the IP address of the server
PC. Leave Port as default and click Run Iperf.
The test will run again and the bandwidth (throughput) display will show results of the test.
NOTE Jperf runs using Java technology. Depending on your PC setup, further installation of Java
software may be required.