Brochure

Technical Data 2032
Effective August 2017
Supersedes December 2015
Product features
• UL® Listed, Std. 248-14, 3/16-15A/300Vac, Guide
JDYX, File E19180
• CSA® Certified, C22.2 No. 248.14, 0-10A/300Vac,
Class 1422-01, File 53787
Fuse holder
HLR
• UL Recognized, 12A, 300Vac, Guide IZLT2, File
E14853
• CSA Certified, 12A, 300Vac, Class 6225-01, File 47235
HLR-2A and HRL-2L
• UL Recognized, 15A, 300Vac, Guide IZLT2, File
E14853
• CSA Certified, 15A, 300Vac, Class 6225-01, File 47235
A
• CSA Certified, 10A, 300Vac, Class 6225-01, File 47235
GLR (fuse) HLR (fuse holder)
Non-rejecting, fast-acting fuse and in-line fuse holders
• GLR fuse and knob are an integral one-piece unit. There
are no replacement knobs (caps)
• Units can be panel mounted with a separate steel clip. For
knockout hole mounting (see dimensions), order catalog
number BK/A-104. For the keyhole punch type hole
mounting, order catalog number 6374 for panels 0.043” to
0.062” thick, or catalog number 4909 for panels 0.030” to
0.042” thick.
• The HLR holder comes with 6 inches of red #18 insulated
solid copper wire attached to the lineside terminal,
customer inserts a #18 insulated solid copper wire into
loadside terminal
• Order holder catalog number HLR-2A to obtain 6 inches of
black #18 insulated solid copper wire pre-installed in the
loadside terminal
• Order catalog number HLR-2L to obtain 6 inches of black
#18 insulated solid copper wire packaged loose
(uninstalled)
• An alternative to the HLR fuse holder is the “A” fuse
holder. The “A” fuse holder comes WITHOUT leads. The
customer inserts #18 insulated solid copper wire into the
lineside and the loadside terminals. The “A” fuse holder
has the same body dimensions, utilizes the same
mounting hole, and takes the same mounting clips as the
HLR, HLR-2A and HLR-2L
• Do not put tension on the fuse holder’s lineside terminal
Catalog symbol: GLR (fuse) HLR (fuse holder)
Ampere Rating: 3/16 - 15 A
Voltage Rating: 300 Volts AC or less
Interrupting Rating: 10,000 A
Agency information
Fuse
GLR fuse catalog numbers
Fuse (amps)
GLR-3/16 GLR-1-6/10 GLR-5 GLR-9
GLR-1/2 GLR-2 GLR-6 GLR-10
GLR-1 GLR-3 GLR-7 GLR-12
GLR-1-1/2 GLR-4 GLR-8 GLR-15*
* Must be used with the HLR-2A holder rated to 15A.
HLR fuse holder catalog numbers
Catalog No. Description
HLR
Holder with installed linseide
terminal wire for 3/16 to 12 amp
GLR fuses
HLR-2A
Holder with installed lineside and
loadside terminal wires for 3/16 to
15 amp GLR fuses
HLR-2L
Holder with uninstalled lineside
and loadside terminal wires for
3/16 to 15 amp GLR fuses
A
Holder without lineside or loadside
termianl wires for for 3/16 to 15
amp GLR fuses