Cut Sheet

1F
6
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright
©
2013 Eaton’s Crouse-Hinds Business
1F Condulet
®
Conduit Bodies -
Cast Iron or Aluminum
Gasket and Covers see page 8
Applications:
Conduit outlet bodies are installed in conduit systems to:
• Act as pull outlets for conductors being installed
• Provide openings for making splices and taps in conductors
• Connect conduit sections
• Provide taps for branch conduit runs
• Make 90° bends in conduit runs
• Provide for access to conductors for maintenance and future
system changes
Features:
Conduit Outlet Bodies
• Form 7 Condulet outlet bodies approach conduit in size for neat,
compact installations
• Form 8 and Mark 9 bodies provide more room for heavier
conductors
• Many shapes and sizes are available for rigid threaded conduit –
for complete listings see pages 6–12
• Conduit hubs have tapered threads and feature integral bushings
for protection of wire insulation
• Form 7 has exclusive snaptight and wedgenut cover attachment to
provide clear, unobstructed cover opening
• Built-in rollers on all Form 5 1
1
/4" to 4" C and LB bodies to
facilitate wire pulling
• Series 5 bodies available in optional configuration with set screws
on hubs for EMT conduit (add suffix -MT to catalog number)
Gaskets
Solid gaskets:
• Are used with blank covers
• For Mark 9 and Form 5, can be converted to open type gaskets by
tearing out center section along scored lines –
1
/2" to 2" sizes
• For Form 7 are used with all covers
Open gaskets:
• For Form 8 –
1
/2" to 4" sizes
• For Mark 9 – 2
1
/2" to 4" sizes
Blank Covers
Stainless steel cover screws are standard on Form 7, Form 8,
Mark 9, Series 5 and Form 5 covers.
• Form 7
Wedge nut design facilitates installation and removal. Nuts are held
captive in cover. Covers can be used with or without gaskets.
SNAPTIGHT
™
Form 7 Covers with integral sealing gaskets are
installed without the use of screws, reducing installation time and
costs. Covers are reusable.
• Form 8
Two cover screws provided on all sizes to provide tight cover and
gasket assembly. Feraloy iron alloy covers have dome shapes for
added strength and extra wiring room.
• Mark 9
Self-retaining cover screws.
Standard Materials:
• Form 7, Form 8 outlet bodies – Feraloy iron alloy
• Mark 9 outlet bodies – copper-free aluminum
• Form 5 – malleable iron
• Series 5 – die cast aluminum
Standard Finishes:
• Form 7, Form 8 outlet bodies – electrogalvanized with aluminum
acrylic paint
• Mark 9 outlet bodies – natural
• Form 5 – electrogalvanized with aluminum acrylic paint
• Series 5 – aluminum acrylic paint
Options:
Description Suffix
Form 7 body and cover only:
Copper-free aluminum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SA
Corro-free
™
epoxy powder coat - external body only . . . . . . . . .
S752
Corro-free
™
epoxy powder coat - internal and external . . . . . . .
S753
Series 5 in an EMT version with set screws on all hubs . . . . . . .
MT
Series 5 pre-packaged with neoprene gasket and cover . . . . . .
CGN
Certifications and Compliances:
Outlet Bodies –
• UL Standard: 514B
• Fed. Spec.: W-C-586D
• CSA Standard 22.2 No. 18
• NEMA 3R Raintight (when installed with cover and gasket)
Form 7
Mark 9
Form 8
Mogul