Cut Sheet
1P
1327
www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright
©
2013 Eaton’s Crouse-Hinds Business
Arktite
®
Heavy Duty Receptacle
Assemblies
400 A, 600 VAC/250 VDC, 50–400 hertz
Weatherproof
Features:
• Grounding contact wire terminators will accommodate ground wire
of same size as phase wire
• Spring band contact design provides multiple points of electrical
contact. Improves electrical reliability and significantly reduces
effort required for insertion and withdrawal
• Crimp/solder type contacts are standard
• Large wire wells are available for "extra flexible" wire
• Larger wire well size connectors will interchange with connectors
of other wire well size of same amperage and contact
configuration
• Self-closing spring doors on receptacles and cord connectors
provide environmental sealing
• Threaded nuts provide positive plug retention
• Two piece plug and cord connector design provide easy
installation
• For disconnect use only – not for current interrupting
1. For listing of additional back boxes, see page 1333. Illustration
shows 3 blank plates and 1 hub plate.
2. S22 suffix for reverse interiors is available from factory only. Field
conversion cannot be done.
3. Replacement interiors for standard units vs. S22 units vary in
length. Specify the unit type when ordering parts.
Wire Mesh Grips:
Applications:
Wire mesh grips are used:
• To provide secure cable termination
• To extend cable life
• With 20, 200 and 400 ampere plugs
Features:
• Eliminate sharp radius of cable bend at the point where cable
enters plug, thereby reducing cable failure
• Absorb longitudinal stresses placed on the point of termination
caused by pulling the cable
• Gripping action increases in direct proportion to amount of tension
applied to cable
Standard Material and Finishes:
• Stainless steel wire braid – Natural
Ordering Information:
Plug Cable Range Grip Range
Nominal Grip
Length–Inches Grip Cat. #
1.375 to 1.875
1.375 to 1.625 8 K163
1.625 to 1.875 11 K188
1.875 to 2.500
1.875 to 2.000 10 K200
2.000 to 2.250 11
3
/4 K225
Dimensions
In Inches:
AP Plugs
AR Receptacles
APR Connectors
AREX Assemblies
Description a
With blank hub plate
5
/16
With hub plate max.
4
5
/8
No. Poles c d
3
5
3
/16 4
3
/16
4
5
13
/16 4
11
/16
1P