Cut Sheet

www.crouse-hinds.com US: 1-866-764-5454 CAN: 1-800-265-0502 Copyright
©
2018 Eaton
17
1F
1F
BC, BLB, BUB, BT, BUBXL
mogul bodies, covers and gaskets –
hot dip galvanized
Applications:
Mogul bodies are installed in conduit
systems to:
• Act as pull outlets for conductors that are
stiff, due to large size or type of insulation
• Provide the longer openings needed when
pulling large conductors
• Prevent sharp bends and kinks in large
conductors (protects insulation during
installation)
• Provide ample openings for splices and
taps
• Provide access to wiring for maintenance
and future system changes
Features:
Mogul bodies have:
• Long openings
• Provision for easy bends
• Taper tapped hubs with integral bushings
• Stainless steel cover screws
• Covers with integral gasket are provided
with bodies
• Pre-installed rollers on select shapes and
sizes (LB and C shapes, 1
1
/2” to 4”) to aid
in wire pulling
BUBXL moguls with rollers:
• Larger internal volume provides additional
space for bending and pulling large
conductors (complies with the 6X wire
bending rule)
• Rollers improve the ability to pull larger
conductors and protect the insulation
when the wire is being pulled, greatly
reducing cut cable incidents
• Cover design takes less time to install and
can be used as a solid or with the center
removed for more internal volume
• Covers with integral gasket are provided
with bodies
Standard material:
• Feraloy iron alloy
Standard finish:
• Feraloy – hot dip galvanized
Certifications and
compliances:
• UL standard: 514B
• Fed. Spec.: W-C-586d
• CSA standard: C22.2 No. 18
Ordering information:
AFor 5” size, use catalog number LBD012. For 6” size, use catalog number LBD014.
BC BLBA
Hub size Cat. #
1”
BC3 HDG CG
1
1
/4”
BC4 HDG CG
1
1
/2”
BC5 HDG WR CG
2”
BC6 HDG WR CG
2
1
/2”
BC7 HDG WR CG
3”
BC8 HDG WR CG
3
1
/2”
BC9 HDG WR CG
4”
BC10 HDG WR CG
Hub size Cat. #
1”
BLB3 HDG CG
1
1
/4”
BLB4 HDG CG
1
1
/2”
BLB5 HDG WR CG
2”
BLB6 HDG WR CG
2
1
/2”
BLB7 HDG WR CG
3”
BLB8 HDG WR CG
3
1
/2”
BLB9 HDG WR CG
4”
BLB10 HDG WR CG
BT
Hub size Cat. #
1”
BUB3 HDG CG
1
1
/4”
BUB4 HDG CG
1
1
/2”
BUB5 HDG CG
2”
BUB6 HDG CG
2
1
/2”
BUB7 HDG CG
3”
BUB8 HDG CG
3
1
/2”
BUB9 HDG CG
4”
BUB10 HDG CG
Hub size Cat. #
1”
BT3 HDG CG
1
1
/4”
BT4 HDG CG
1
1
/2”
BT5 HDG CG
2”
BT6 HDG CG
2
1
/2”
BT7 HDG CG
3”
BT8 HDG CG
3
1
/2”
BT9 HDG CG
4”
BT10 HDG CG
BUBXL (extra large)
With cover and gasket
Hub size Cat. #
2”
BUBXL6 HDG
3”
BUBXL8 HDG
Blank replacement covers
Feraloy iron alloy (all B series moguls
except BUBXL)
Size
Cat. #
With round
neoprene gasket
1” or 1
1
/4”
BG48 HDG
1
1
/2” or 2”
BG68 HDG
2
1
/2” or 3”
BG88 HDG
3
1
/2” or 4”
BG98 HDG
BUB