Plugs & Receptacles PowerMate™ drilling pin and sleeve connectors
Safe. Reliable. Fast.
PowerMate™ Series Drilling rig pin and sleeve power connections PowerMate™ is designed to support the modularity of drilling rig systems by providing safe and reliable power connections for rigging-up and rigging-down equipment quickly and efficiently.
Specifications & features Handle body • Thick epoxy powder coating is standard finish on PowerMate products. • Coating reduces corrosion and increases life of product. • Industry standard profile increases ease of plugging and unplugging. Insulator assemblies • Unimpeded, easy-access phase and ground terminals make wire termination quick and easy. • Molded-in-place markings for phase/ground and conductor strip lengths reduce installation errors.
Electrical ratings Options • 30, 60, 100, 150, 200A 600 VAC/250 VDC • Special polarity – receptacle interior rotated 22.5° to the right and plug changed to match. For use where two or more receptacles of the same ampere rating, style and number of poles are to be installed in the same area for use on different voltages and/or frequencies. Prevents insertion of a plug in a receptacle with different electrical rating.
Ordering information Part number example and description CCP3034BC–RS Eaton's Crouse-Hinds PowerMate™ plug, 30A, 3 wire, 4 pole, 0.390-1.
Wire sizes The wire size table lists the diameter of the wire recess in PowerMate plug and receptacle contacts so that maximum size of bare conductor can be determined. Range of wire sizes shown in table are intended only as a guide. Depending on type of wire used (building wire, flexible or extra flexible cable) and its construction (number and size of strands), bare copper diameters vary widely.
100 Amp: Receptacles, plugs, connectors Back boxes:100 & 150 Amp Plug Cord connector Description & configuration Cable range Part number Receptacle Cable range Part number 2 wire 2 pole style 1 CDR1022 0.875-1.906” CCP1022CD 0.875-1.906” CRC1022CD 2 wire 3 pole style 2 CDR1023 3 wire 3 pole style 1 CDR1033 0.875-1.906” CCP1033CD 0.875-1.906” CRC1033CD 3 wire 4 pole style 2 CDR1034 0.875-1.906” CCP1034CD 0.875-1.
Dimensions Receptacle Plug Connector A A A B B B Receptacle A B Plug A B Connector A B 30A 2.8750 3.3750 30A 6.5000 2.3125 30A 6.6000 2.5625 60A, 3 pole 4.2500 4.5000 60A, 3 pole 8.1700 3.6250 60A, 3 pole 08.300 2.3125 60A, 4 pole 4.2500 4.5000 60A, 4 pole 8.1700 3.7500 60A, 4 pole 8.3000 2.3125 100A, 3 pole 5.2500 4.2500 100A, 3 pole 10.8000 3.7500 100A, 3 pole 11.5000 3.1875 100A, 4 pole 5.2500 4.2500 100A, 4 pole 10.8000 4.1250 100A, 4 pole 11.
Replacement parts Standard replacement parts Complete insulator assembly 30A 60A 100A 150A 200A CDR-CRC CRI-3022 CRI-6022 CRI-1022 – – CCP CPI-3022 CPI-6022 CPI-1022 – – CDR-CRC CRI-3023 CRI-6023 CRI-1023 – CRI-20023 CCP CPI-3023 CPI-6023 CPI-1023 – CPI-20023 CDR-CRC CRI-3033 CRI-6033 CRI-1033 – CRI-20033 CCP CPI-3033 CPI-6033 CPI-1033 – CPI-20033 CDR-CRC CRI-3034 CRI-6034 CRI-1034 CRI-15034 CRI-20034 CCP CPI-3034 CPI-6034 CPI-1034 CPI-15034 CPI-20034 CD
1 Derrick/Mast 2 VFD/Generators 3 Fuel Tank 4 Motor Control/VFD/SCR House 5 Doghouse/ Operator's House 6 Power/Pump Station 7 Shale Shaker 8 Mud Tanks/Pumps Full portfolio of land-based 1 powering solutions 3 2 4 Drawworks & Top Drive 10 Drilling Floor 10 6 7 9 5 9 8 Crouse-Hinds drilling solutions Single pole power # of pins Roughneck™ Single Pole Series Low to medium amp power # of pins PowerMate™ Series Secure, single pole power, rated to 1135A for use in hazardous and n
For more information: If further assistance is required, please contact an authorized Eaton Distributor, Sales Office, or Customer Service Department. U.S. (global headquarters): Eaton's Crouse-Hinds business 1201 Wolf Street Syracuse, NY 13208 TEL: (866) 764-5454 FAX: (315) 477-5179 FAX Orders Only: (866) 653-0640 Mexico/Latin America/ Caribbean: TEL: 52-555-804-4000 FAX: 52-555-804-4020 ventascentromex@eaton.com crousecustomerctr@eaton.