Cut Sheet

5
EATON'S CROUSE-HINDS PowerMate pin and sleeve power connectors
Options
• Special polarity – receptacle interior rotated 22.5° to the right
and plug changed to match. For use where two or more
receptacles of the same ampere rating, style and number of poles
are to be installed in the same area for use on different voltages
and/or frequencies. Prevents insertion of a plug in a receptacle
with different electrical rating.
•
Reverse service – receptacle assembled with plug interior and
plug assembled with receptacle interior. Used in applications
where plug is energized to feed normally de-energized receptacle.
Interiors are field interchangeable using only a screwdriver.
(* excludes 150 and 200A)
Electrical ratings
•
30, 60, 100, 150, 200A 600 VAC/250 VDC
Certifications and compliances
•
Plugs (CCP 30-150A, including CCP3034) hazardous location rated
when used with Crouse-Hinds interlocked receptacles (ex. FSQC,
EBBR models)
- Class I, Division 1, Groups B, C, D (excludes 200A)
- Class II, Division 1, Groups F, G (excludes 200A)
• CE marked (excludes RS option and 200A)
•
UL standards
- UL1682; UL1686; NEMA250; IEC60309-1;
IEC60309-2
•
CSA standard
- CSA 22.2 No. 182.1
•
Suited for use with Type P cable, flexible cord and cables rated
for extra hard usage
•
NEMA 4X
Standard materials
•
Receptacle housing, plug and cord connector bodies - high
impact strength copper-free aluminum (less than 0.4% copper)
• Back boxes - cast aluminum
• Insulation - fiberglass reinforced polyester
• Contacts - naval brass
Standard finishes
•
Copper-free aluminum - epoxy powder coat
• Fiberglass reinforced polyester - natural (red)
• Naval brass - natural
Generator
Transformer
switch
PowerMate
receptacle
PowerMate plug
CDR-RS
reverse service receptacle
(male contacts)
CCP-RS
reverse service plug
(recessed female contacts)
Additional features - 200 Amp
Spring cap
• Spring cap with stainless steel
hardware and wing nuts to
ensure proper environmental
sealing
Easy to wire
• Gaps in insulator allow easy
access to wire terminals
• Body breaks into two pieces,
facilitating cable installation
Easy to connect
• Sloted screwdriver
holds cap open