Installation and Owner's Manual

Fig 3-5

Fig 3-6

3. INSTALLATION METHOD

Switch box

Back plate

For exposed mounting, fasten the back plate on the wall with the 3 screws (M4×20)

and plugs. (Fig.3-5)

For ush-mounting, fasten the back plate on the switch box with 2 screws (M4×25) and

fasten it on the wall with 1 screw (M4×20). (Fig.3-6)

5. Fasten the back plate of the wire control

Back plate

Screws (M4×20)

Screw (M4×20)

Screws (M4×25)

NOTICE

Put on a at surface. Be careful not to distort the back plate of the wire control

by overtightening the mounting screws.