Installation Manual

Optional accessories
This indoor unit requires installation of an optional decoration
panel.
ACCESSORIES
Ensure that the following accessories are included with your unit:
All the pictures in this manual are for explanation purposes only.
They may be slightly different from the air conditioner you
purchased (depending on the model). The actual shape prevails.
NOTE
For the following items, take special care during
construction and check after installation is finished.
Is the indoor unit fixed firmly?
The unit may drop, vibrate, or make noise.
Is the gas leak test finished?
It may result in insufficient cooling or heating.
Is the unit fully insulated?
Condensate water may drip.
Does drainage flow smoothly?
Condensate water may drip.
Does the power supply voltage correspond to that
shown on the name plate?
The unit may malfunction or components may burn out.
Are wiring and piping correct?
The unit may malfunction or components may burn out.
Is the unit safely grounded?
Dangerous at electric leakage.
Is the wiring size according to specifications?
The unit may malfunction or components may burn out.
Is nothing blocking the air outlet or inlet of either the
indoor or outdoor units?
It may result in insufficient cooling or heating.
Are refrigerant piping length and additional refrigerant
charge noted down?
The refrigerant charge in the system might not be clear.
Mark
when
finished
√
3
1 Remote control
2 Batteries
3 Remote control holder (on some models)
4 Tapping screws (M3 x 10 mm) (on some models)
5 Installation and user's manual
6 Paper pattern for installation (on some models)
7 Metal champ (on some models)
8 Drain hose (on some models)
9 Expansible hooks (on some models)
10 Installation hooks (on some models)
11 Throttle (on some models)
12 Anti-shock rubber (on some models)
13 Drain plug (only heat pump models) (with the outdoor unit)
14 Seal ring (only heat pump models) (with the outdoor unit)
1x 1x
11
12
13 14
1x
1x
4x
2x
4x
1x
1x+1x
2x
1
2
3
4
5
6
7
8
1x1x
9 10
1x
1x