Wire Control Installation Manual

Wall-Mounted Remote Control Wiring

WARNING

• The wiring should adapt to the wire control current.

Otherwise, electric leakage or overheating may occur

and result in ﬁre.

• The speciﬁed cables must be used in the wiring. No

external force should be applied to the terminal.

Otherwise, the wire may be damaged and heating may

occur and result in ﬁre.

CAUTION

• The shielded wire must be grounded.

•

The connecting cable shouldn't be longer than 20 m (65.5

ft).

• The remote control operates on a low-voltage circuit

loop. DO NOT connect a 220V or 380V cable to it.

• Make sure the conﬁgured tubes are 30-50 cm (12-20 ft)

or more apart.

• DO NOT employ an ohmmeter to detect the insulation

after wiring the remote control.