Wire Control Installation Manual

7
Preparation before Installation
1. Be sure you have the following parts:
Table 1
No Name Quantity Remarks
1 Remote control 1
2 Screws 3
M4x20 (for mounting on the wall)
3 Anchors 3
For mounting on the wall
4
Screws 2
M4x25 (for mounting on switch box)
5 Plastic screw bars 2 For fixing on the switch box
6
The connective
wires group
1 Optional
2. Prepare the following tools:
Table 2
No Name
Quantity
1
Switch box
1
2
Wiring tube (insulating sleeve and tightening screw)
1
3. Select installation location:
DO NOT install the remote control near flammable liquids
or gases such as gasoline or hydrogen sulfide. This will
create a fire hazard.