SOPHIA HIGH-WALL DUCTLESS AIR CONDITIONING & HEATING SYSTEM Quick-Start Guide ON/OFF TEMP MODE SILENCE FP SWING FAN SPEED SWING TIMER ON SLEEP TIMER OFF TURBO SELF CLEAN LED FOLLOW ME LOCK RESET
CONTENTS Handling the remote controller ...................................................... 2 Remote controller Specifications................................................... 3 Function buttons .................. ......................................................... 5 Indicators on LCD .......................................................................... 7 How to use the buttons ................................................................. 8 Auto operation...........................
Handling the remote controller Location of the remote controller. Use the remote controller within a distance of 26,2ft (8 meters) from the appliance, pointing it towards the receiver. Reception is confirmed by a beep.
Remote Controller Specifications Rated Voltage 3.0V(Dry batteries R03/LR03×2) Signal Receiving Range 26,2ft (8m) Environment 23OF~140OF Performance Feature 1. Operating Mode: AUTO, COOL, DRY, HEAT(Cooling only model without), and FAN. 2. Timer Setting Function in 24 hours. 3. Indoor Setting Temperature Range: 62OF~86OF. 4. Full function of LCD (Liquid Crystal Display). NOTE: Buttons design might be slightly different from the actual one you purchased depending on individual models.
Function buttons 1 ON/OFF Button Operation starts when this button is pressed and stops when this button is pressed again. 2 MODE Button Each time the button is pressed, the operation mode is selected in a sequence of following: AUTO 1 TEMP 2 MODE 3 SWING FAN SPEED 4 SWING TIMER ON 12 5 SLEEP TIMER OFF 13 6 TURBO SELF CLEAN LED FOLLOW ME 14 SILENCE FP 10 RESET HEAT FAN 3 Swing Button Used to stop or start horizontal louver movement .
Function buttons 1 8 9 ON/OFF TEMP 2 MODE 3 SWING FAN SPEED 4 SWING TIMER ON 12 5 SLEEP TIMER OFF 13 6 TURBO SELF CLEAN LED FOLLOW ME 14 SILENCE FP 10 11 7 LOCK RESET 15 7 RESET Button: When you press the recessed RESET button, all current settings are cancelled and the control will return to the initial settings. 8 UP Button( ) Push this button to increase the indoor temperature setting in 1oF increments to 62oF.
11 1 TEMP 2 MODE 3 SWING FAN SPEED 4 SWING TIMER ON 12 5 SLEEP TIMER OFF 13 6 TURBO SELF CLEAN LED FOLLOW ME 14 SILENCE FP TIMER ON Button Press this button to initiate the auto-on time sequence. Each press will increase the auto-timed setting in 30 minutes increments. When the setting time displays 10H, each press will increase the auto-timed setting 60 minutes increments. To cancel the auto-timed program, simply adjust the auto-on time to 0:0.
Indicators on LCD Transmission Indicator This transmission indicator lights when remote controller transmits signals to the indoor unit. Mode display Displays the current operation mode. Including auto( ), cool( ), dry( ), heat( ) (Not applicable to cooling only models), fan( ) and back to auto( ). auto cool dry heat fan SET TEMP. TIMER ONOFF silence sleep follow me lock F run Temp./Timer display O O Displays the temperature setting(62 F~86 F).
How to use the buttons Auto operation 3 2 2 ON/OFF TEMP 1 MODE SILENCE FP SWING FAN SPEED SWING TIMER ON SLEEP TIMER OFF TURBO SELF CLEAN LED FOLLOW ME NOTE 1. In the Auto mode, the air conditioner can logically choose the mode of Cooling, Fan, and Heating by sensing the difference between the actual ambient room temperature and the setting temperature on the remote controller. 2. In the Auto mode, you can not switch the fan speed. It has already been automatically controlled. 3.
Dehumidifying operation 3 2 2 ON/OFF TEMP 1 MODE SILENCE FP SWING FAN SPEED SWING TIMER ON SLEEP TIMER OFF TURBO SELF CLEAN LED FOLLOW ME LOCK RESET Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select DRY mode. 2. Press the UP/DOWN buttons to set the desired temperature. The temperature can be set within a range of 62 OF~86 OF in 1 OF increments. 3.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. ON/OFF TEMP MODE SILENCE FP SWING FAN SPEED SWING TIMER ON 1 SLEEP TIMER OFF 2 TURBO SELF CLEAN LED FOLLOW ME LOCK RESET 1. Press the TIMER ON button. The remote controller shows TIMER ON, the last Auto-on setting time and the signal "h" will be shown on the LCD display area.
! CAUTION The effective operation time set by the remote controller for the timer function is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20, 21, 22, 23 and 24. Example of timer setting TIMER ON (Auto-on Operation) The TIMER ON feature is useful when you want the unit to turn on automatically before you return home.
TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. TIMER OFF Stop On Set 10 hours later Example: To stop the air conditioner in 10 hours. 1. Press the TIMER OFF button, the last setting of stopping operation time and the signal "h" will show on the display area. 2. Press the TIMER OFF button to display "10h" on the TIMER OFF display of the remote controller. 3.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. TIMER ON OFF Start Stop Off Set 2 hours later after setting 5 hours later after setting Example: To start the air conditioner 2 hours after setting, and stop it 5 hours after setting. 1. Press the TIMER ON button. 2. Press the TIMER ON button again to display 2.0h on the TIMER ON display. 3. Press the TIMER OFF button. 4.
LED/FOLLOW ME function Press this button less than 2nds will initiate LED function. And if keep pressing this button more than 2nds,the FOLLOW ME function is initiated. When the Follow Me function is activated, the remote display is actual temperature at its location. The remote control will send this signal to the air conditioner every 3 minutes interval until press the FOLLOW ME button again. The Follow Me function is not available under DRY and FAN mode.
FAQs Why does the fan continue to run even when the unit is not cooling or heating? To maintain consistent temperatures and minimize energy-loss from constant starts and stops, the fan keeps air flowing past the thermostat. What temperature is displayed on the remote controller? The remote always displays your desired indoor temperature. (You may view current indoor and outdoor temperatures on the indoor unit’s Front Panel Display.
