AIR CONDITIONER REMOTE CONTROL ILLUSTRATION The design and specifications are subject to change without prior notice for product improvement. Consult with the sales agency or manufacturer for details. ON/OFF SHORT CUT TIMER ON MODE TEMP FAN Thank you very much for purchasing our air conditioner. Please read this owner's manual carefully before using your air conditioner.
Remote Control Specifications CONTENTS Remote control Specifications. ...................................................2 Rated Voltage 3.0V(Dry batteries R03/LR03×2) Signal Receiving Range 315”/8m Environment 23 OF~140 OF Operation buttons .................. . ..................................................3 Indicators on LCD ..................... ...................................................6 NOTE: How to use the buttons . ........... .................................................
Operation of buttons Operation of buttons 6 1 2 ON/OFF Button This button turns the air conditioner ON and OFF. 3 ON/OFF SHORT CUT 2 MODE TIMER ON 8 TIMER OFF 9 10 11 12 FAN 4 SLEEP SWING DIRECT 5 TURBO LED DRY HEAT NOTE:Temperature contol is not available in Fan mode. FAN FAN Button Used to select the fan speed in four steps: AUTO LOW MED HIGH 7 NOTE: You can not switch the fan speed in AUTO or DRY mode. TEMP 3 COOL temperature setting in 1oF increments to 62oF.
Operation of buttons Indicators on LCD 9 TIMER OFF Button Press this button to initiate the auto-off time sequence. Each press will increase the auto -timed setting in 30 minutes increments. When the setting time displays 10.0, each press will increase the auto-timed setting 60 minutes increments. To cancel the autotimed program, simply adjust the auto-off time to 0.0 Information are displayed when the remote control is powered up.
How to use the buttons How to use the buttons Dehumidifying operation Auto operation 2 3 ON/OFF 1 MODE Ensure the unit is plugged in and power is available. The OPERATION indicator on the display panel of the indoor unit starts flashing. 1. Press the MODE button to select Auto. 2. Press the UP/DOWN button to set the desired temperature. The temperature can be set within a range of 62 OF~ 86 OF in 1 OF increments. 3. Press the ON/OFFbutton to start the air conditioner. SHORT CUT NOTE 1.
Timer operation Press the TIMER ON button can set the auto-on time of the unit. Press the TIMER OFF button can set the auto-off time of the unit. To set the Auto-on time. ON/OFF SHORT CUT MODE TIMER ON TEMP FAN TIMER OFF SLEEP SWING DIRECT TURBO LED 1 2 1. Press the TIMER ON button. The remote control shows TIMER ON, the last Auto-on setting time and the signal "H" will be shown on the LCD display area. Now it is ready to reset the Auto-on time to START the operation. 2.
TIMER ON → TIMER OFF (Off → Start → Stop operation) This feature is useful when you want to start the air conditioner before you wake up and stop it after you leave the house. TIMER OFF (Auto-off Operation) The TIMER OFF feature is useful when you want the unit to turn off automatically after you go to bed. The air conditioner will stop automatically at the set time. Stop On Set 10 hours later Example: To stop the air conditioner in 10 hours. 1.
Using the remote control holder NOTE: (optional) The device should comply with the local national regulations. In Canada, it should comply with CAN ICES-3(B)/NMB-3(B). In USA, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.