User's Manual

In systems which include a T47 Cable Remote, the 16-pin connector is used for

connection to the T47. However, in T45-only systems, a truck-mounted Emergency

Override Panel must be provided; use either the old-style Emergency Override Panel

Interface Cable or the new Custom Emergency Override Panel Harness to make

connections from the 16-pin connector to this Panel.

The Emergency Override Panel

must provide a normally-closed Emergency-Stop button across pins E and F.

The

emergency-stop circuit must be closed to operate the machine.

The Emergency

Override Panel must also provide a momentary, normally-open contact between pin

B and pin G; this is the override button which the operator must press and hold to

override the T45 Radio Transmitter.

Pin B is also the common to all the override

switches (pins J through S). Pins C and D are not used for the Emergency Override

Panel.