User's Manual

This manual is for the use of professionals to guide them in the installation, operation and
basic system maintenance of the equipment covered.
FCC Notice, U.S.A.
HPD-24RC complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation
Caution - Changes or modifications not expressly approved by the OMNEX Control
Systems ULC will void the user’s authority to operate the equipment.
IC Notice, Canada
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
RF Exposure Information
READ THIS INFORMATION BEFORE INSTALLING THE HPD-24RC
This product is intended for portable and/or fixed installation applications. In order to
comply with FCC/ISC adopted RF exposure requirements, installation of this transmitter
system's antennas must be performed in a manner that will provide at least 3 cm
clearance from the antenna to any user or member of the public.
HPD-24RC was certified with the following antennas: an internal coaxial antenna, an
internal ¼ wavelength piece of wire, or an external ¼ wave stainless steel mobile mount
whip. All antennas have a 0dB gain.
The maximum radiated output power of these antennas satisfies the maximum
permissible exposure (MPE) limits as specified in §1.1310 of FCC regulations for general