Installation Instructions

www.eaton.com/wireless

call toll free: 1-800-663-8806 DMAN-4077-01 R01

Service Mode: Run Diagnostics

Light Legend

Solid

Slow

Flash

Fast

Flash

Red

Solid

Green

Solid

Red & Green

Alternating

Yellow

Solid

Test Buttons and Vibrator

1. On the TD110 press top right Button  to enter Diagnostic mode .

2. STATUS LED will blink RED and GREEN

. All LEDs will turn on

RED.

3. Press each button to test. On each button press, the associated but-

ton LED which was RED will change to GREEN while the button is

pressed.

4. Press [GREEN] button

 to test Vibrator. This will activate Vibrator for

1 second.

Press and release Power OFF [RED] to exit diagnostic mode and turn off

the unit.





