Installation Instructions

24
www.eaton.com/wireless
call toll free: 1-800-663-8806 DMAN-4077-01 R01
Eaton Part Number Description
FMEC-3840-02 Plastic Holster, Black
ASSY-4041-02 Charge Cradle, Generic
ASSY-4041-03 Charge Cradle, charge only
TD110 RCU
Size 5.32" x 2.8" x 1.31" (135mm x 71mm x 33mm)
Weight .95 lbs (434g)
Construction Industrially robust, hardened plastic, chemical resistant
Power Built in Rechargeable Lithium Ion
Battery Life 30 hours
Operating
Temperature Range
-4ºF to +131ºF (-20ºC to +55ºC)
Outputs N/A
Antenna Internal
Approvals USA- FCC part 15.247 Canada- IC RSS 210 Issue 6, May. 2020
Storage temperature Range -4ºF to +136ºF (-20ºC to +58ºC)
Parts & Accessories
Specifications
Warranty
EATON, Controls and Power Conversion Division,
Wireless Solutions, warrants to the original pur-
chaser that the Eaton Wireless products are free
from defects in materials and workmanship under
normal use and service for a period of ONE YEAR,
parts (EXCLUDING: SWITCHES, CRYSTALS, OR
PARTS SUBJECT TO UNAUTHORIZED REPAIR
OR MODIFICATION) and labor from the date of
delivery as evidenced by a copy of the receipt.
EATON entire liability and your exclusive remedy
shall be, at EATON's option, either the (a) repair or
(b) replacement of the EATON Wireless product
which is returned within the warranty period to
EATON Wireless freight collect by the EATON
APPROVED carrier with a copy of the purchase
receipt and with the return authorization of EATON
Wireless. If failure has resulted from accident,
abuse or misapplication, EATON shall have no
responsibility to repair or replace the product under
warranty. In no event shall EATON be responsible
for incidental or consequential damage caused by
defects in its products, whether such damage oc-
curs or is discovered before or after replacement or
repair and whether or not such damage is caused
by the negligence of EATON.
FCC Rules and Compliance
This device complies with FCC Rules Part 15 operation is subject
to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference, including interference
that may cause undesired operation of the device.
Changes or modifications to this device, not expressly approved
by Cooper Industries (Electrical) Inc. could void the user’s authori-
ty to operate the equipment
Industry Canada Notifications
This device complies with Industry Canada’s license-exempt
RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage;
(2) l’utilisateur de l’appareil doit accepter tout brouillage ra-
dioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
EATON
eMobility Division
Mobile Wireless Control
Solutions
74-1833 Coast Meridian Road
Port Coquitlam, BC, Canada
V3C 6G5
Tel: [phone]
Fax: [phone]
Toll Free: 1-800-663-8806
www.eaton.com/wireless