Product Guide
10
www.eaton.com/wireless
call toll free: 1-800-663-8806 DMAN-4096-01 R1
Before using an RCU, make sure that it has been fully charged
1. Turn on the RCU
Press Power [ON]
. Refer to the Light Legend below for LED states.
When in the vicinity of a powered and paired Base Station the COMM LED
will blink YELLOW
.
2. Turn off the RCU
Press the Power [OFF]
button.
Power the RCU
NOTE: The batteries can only be charged if the TS110 is between 0°C
and 45°C. The unit will operate below 0°C but battery capacity
is reduced at low temperatures. Exposing TS110 to tempera-
tures below -20°C or above 55°C could permanently damage
the batteries.
Turn ON RCU
Light Legend
Solid
Slow
Flash
Fast
Flash
Red
Solid
Green
Solid
Red & Green
Alternating
Yellow
Solid