Product Guide

15
www.eaton.com/wireless
call toll free: 1-800-663-8806 DMAN-4096-01 R1
Light Legend
Solid
Slow
Flash
Fast
Flash
Red
Solid
Green
Solid
Red & Green
Alternating
Yellow
Solid
A.
Service Mode: Start Pairing
3. Start Pairing
A. Press the TS110 Power ON [GREEN] button
 to start the pairing process.
The pairing will start and the COMM LED
.
on TS110 will turn on YELLOW
B.

NOTE: If the pairing fails, the TS110 STATUS LED will turn ON RED. Correct any errors, cycle power to
both the RCU and Base Station, then repeat the pairing process.
If repeated attempts at pairing fails, contact your service representative for assistance as there may
be a setup or hardware failure.
B. Pairing is complete when
1. TS110 STATUS LED
turns GREEN
2. Base Station E-Stop light will change from
GREEN to RED
.
E-Stop: solid RED


