Manualshelf

Instruction Manual

ManualsBrandsCooper Instruments & Systems ManualsMeasuring instrumentsDFI INFINITY Digital Force Indicator/Controller
12345678910
NOTES, WARNINGS AND CAUTIONS
Information that is especially important to note is identified by these labels:
• NOTE
• WARNING
• CAUTION
• IMPORTANT
NOTE: provides you with information that is important to successfully set up and use the Programmable digital
meter.
CAUTION or WARNING: tells you about the risk of electric shock.
CAUTION, WARNING or IMPORTANT: tells you of circumstances or practices that can affect the meter’s
functionality and must refer to accompanying documents.
1.0 INTRODUCTION
1.1 Description
The INFINITY series is a complete line of process indicators/controllers, offering exceptional performance.
The DFI INFINITY strain gauge meter is front panel configurable to accept 0-20 and 4-20 mA dc current inputs,
unipolar and bipolar DC voltage inputs and potentiometer inputs. The DFI INFINITY meter will accept inputs from
most of the process sensors in use today such as transmitters, pressure transducers, and potentiometers.
Configuring the INFS is accomplished through the 5 front panel buttons. If the optional RS-232 or RS-485
communications are installed, the user may remotely set the display parameters.
Options for the INFINITY include analog and BCD outputs, relay outputs, and RS-232 or RS-485 communications.
1.2 Features
The following is a list of features of the DFI INFINITY.
• 6-digit LED display in red or green
• 0.005% accuracy of reading
• 12 DC input ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V, 0-20
mA, or 4-20 mA.
• 1.5 to 11 or 24 V dc sensor excitation
• Peak & Valley detection and memory
• TARE
• Up to 13 readings per second
• 4 isolated open collector outputs (standard) and optional isolated relay or isolated BCD and isolated analog
outputs
• Optional isolated RS-232 or RS-485 communications
• NEMA 4 Front Panel/IP65
• Non-volatile memory without battery back-up
• 115 Vac, 50/60 Hz, 230 Vac, 50/60 Hz power supply
1.3 Available Models
The following INFINITY options are available from Cooper Instruments & Systems.
NOTE: The following options are available installed at the time of purchase or as separate items installed by the
user after purchase: Analog Output Board, BCD Output Board, Relay Output Board, RS-232 Communications
Board, and RS-485 Communications Board.
CF 67 1 M1291/N/0403 11279ML-02 Rev. A