PS, FB, PSH, ESH MECHANICAL FORCE GAUGES USER’S GUIDE www.cooperinstruments.
GENERAL OPERATION 1. Press (or rotate for Model PSH/ESH) Peak Switch OFF. 2. Hand tighten (no tool!) selected attachment to the measuring shaft. 3. Rotate Tare Ring to read “0” to tare the weight of attachment and measuring shaft orientation. 4. Begin measuring. Real Time Mode: the Peak Switch is OFF and the gauge displays force as it changes. During Real Time Mode, you can hold a critical reading by turning the Peak Switch to the ON position.
OPTIONAL HANDLE The OH-1/MOH-1 fits PS, MF and FB series. Constructed of high quality steel for rugged use, the handle facilitates measurements of heavy loads. Complete with mounting screws, the OH-1 handle ensures safe and consistent measuring conditions. PS/MF Ranges (Resolution) Accuracy: PS±0.1% F.S. MF±0.3% F.S. Pounds Kilograms Newtons Model PS-32 oz PS-80oz PS-2 PS-5 PS-10 PS-20 PS-30 PS-50 PS-100 Capacity (Resolution) 32 ozf (0.25ozf) 80 ozf (1ozf) 2lb (0.01 lb) 5 lb (0.025 lb) 10 lb (0.
DIMENSIONS When installing be sure to keep the depth to 8mm.
DIMENSIONS CF 22 5 PS, FB,PSH,ESH (V-4/06)
WARRANTY REPAIR POLICY Limited Warranty On Products Any Cooper Instruments product which, under normal operating conditions, proves defective in material or in workmanship within one year of the date of shipment by Cooper will be repaired or replaced free of charge provided that a return material authorization is obtained from Cooper and the defective product is sent, transportation charges prepaid, with notice of the defect, and it is established that the product has been properly installed, maintained, an